|
|
|
|
Joined: Jan 2016
Posts: 2
Novice
|
Hi everyone...would anybody out there happen to have a user and/or parts manual to suit a B&S Sprint 375?...(Rover chassis)..the numbers have not been stamped very well but they look like: Model 90902, Type 2091 and Code 04121052, can I tell when and where it was produced from these numbers?
Thanks all.
|
|
|
|
|
Joined: Jan 2015
Posts: 1,548 Likes: 25
SENIOR TECHNICIAN
|
Well it was manufactured December 10, 2004. The 52 which get general production plant but I don't this as is not asked for much here in the States but someone here does as I have seen refered to before.
|
|
|
|
|
Joined: Jan 2012
Posts: 1,842 Likes: 14
Moderator
|
Yep that's the production date, as AVB says.
But the other numbers don't look to be correct - could the Model be 98902? And the Type should follow the format XXXX-XX; i.e. 6 digits in all.
Try rubbing a piece of chalk across the numbers, then wiping off the excess. This often makes them easier to read.
Cheers,
Gadge
"ODK Mods can explain it to you, but they can't understand it for you..."
"Crazy can be medicated, ignorance can be educated - but there is no cure for stupid..."
|
|
|
|
|
Joined: Nov 2013
Posts: 693
Qualified Senior
|
I've got a few 375 Sprints laying around in various conditions. If you end up needing a part give me a yell and I'll see if I have what you need.
|
|
|
|
|
Joined: Jan 2016
Posts: 2
Novice
|
Thanks fella's....there does appear to be an issue with the way the numbers have been stamped; very faintly, def only 5 numbers, it is possible that one digit is missing, I'll try the chalk trick, thanks Gadge...Paul_c, thanks but the B&S website wont recognize the numbers at this point in time.
Thanks for the manufacturing date AVB.
Trev, today I installed a carby kit, new plugs, air filter, oil and blades and the thing runs like new..thanks for your offer.
|
|
|
|
|
Joined: Jan 2015
Posts: 1,548 Likes: 25
SENIOR TECHNICIAN
|
Probably going to be 09D902-2091-B1 base on type number and being a 09 series. Probably the "D" being misread as a Zero. No "098" with that type number.
Model numbers are sometime only 5 digit and we need to add the leading Zero. The six digit number comment was about the type number setup.
Last edited by AVB; 24/01/16 10:25 AM.
|
|
|
|
|
Joined: Jan 2015
Posts: 988 Likes: 7
Qualified Senior
|
Putting that code into the Briggs engine manual search brings up the manual
https://www.briggsandstratton.com/us/en/support/manuals/results?NTT=09D902-2091*
Hope this is what you are after
Last edited by paul_c; 24/01/16 04:59 PM.
|
|
|
|
Forums144
Topics12,729
Posts106,672
Members17,966
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
|
|
