OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames Just got myself a Victa 526, coupla a questions

Hello all, just got a Victa 526 and noticed the belts need replacing, I see I can get the belts from Outdoorking, but I wanted to replace the two springs on the front, I think the part number would be 732-0153, is that correct?, and if so where would I be able to buy these.

Thanks in advance Mark.

Hi Mark, welcome to Outdoorking. So far as getting parts for Victa ride-ons such as the 5-26 is concerned, it is often best to go to the actual manufacturer rather than Victa. AFAIK Victa did not ever make ride-on mowers, but re-badged various existing commercially-available units. However I do not know who actually made the 5-26, or its normal model name or number, so you may need to consult Bruce, the Outdoorking site owner, to track that down.

So far as part numbers for springs are concerned, on that mower Victa's part numbers for all of the specific parts begin with TM, and their numbers for all of the generic parts begin with HA, so I do not understand the number you have quoted. I also do not know which pair of springs you are referring to. There are two springs supporting the front of the mower deck (Items 12 & 32 on Page 12 of the illustrated parts list), and their Victa part number seems to be TM60195A. They are described as "Spring .75 OD x 8.65" Lg". So, if the two springs you are talking about are three quarters of an inch in diameter and 8.65 inches long, this may be them.

Mark,

The spring should work as it is the same measurement in diameter and is now listed on the OutdoorKing website just type the number into the search box for pricing.

Great, thanks for the speedy replies.