OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Victa Two Stroke Engines Victa Ignition Module

Thanks Gadge,

Those leads look like they are for a old model (maybe a Rotomo) with the screw-on type attachment to the plug. I guess I could use that but the uninsulated plug on an east-west motor might cause issues like shorting out to the undergrowth or even the odd boot to an unsuspecting toe. I need the one that fits the red plug cover, its quite a neat fit over the lead. I guess I could use the same just cut off the terminal or at least just the bit with the hole in it.

I need a few other ODK items so that will probably be the way to go.

All the best
Jeff

The brass tag will fit in the red boot with a little persuasion. Then remove the top on the spark plug. See the pictures below:

I just get these and throw the spring bit away
.ebay.com.au/itm/5-Pack-Spark-Plug-Cover-Cap-Boot-5mm-Can-be-fitted-to-Mowers-Brushcutters-/151836790825?hash=item235a2d9029:g:w8UAAOSw3ydVmME9

Thanks LRT,

Looks like ODK is the way to go. Beautiful photos by the way.

All the best
Jeff

Jeff, I PMed you.
speedy

Hi Speedy,

I have PM'd you

Jeff