|
|
|
2 members (Dandare, tortoise2),
2,906
guests, and
240
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2015
Posts: 1,526 Likes: 23
SENIOR TECHNICIAN
|
just a thought...
To me it looks like an ignitor system. If so then the ignitor if connected backwards the system will still spark; just out of time as would triggering on the wrong pulse from the flywheel.
Here old points systems used positive ground and the newer versions use negative ground. The polarity of the flywheel magnets determined which way ignitor has to setup.
|
|
|
|
|
Joined: Jan 2017
Posts: 21
Novice
|
Ok- so what do I do to reverse it? change the leads around to the opposite side?
Thanks for your help here
|
|
|
|
|
Joined: Jan 2017
Posts: 21
Novice
|
Ok- so what do I do to reverse it? change the leads around to the opposite side?
Thanks for your help here
|
|
|
|
|
Joined: Jan 2016
Posts: 8,112 Likes: 231
SENIOR TECHNICIAN
|
The wire from the module goes to the far side terminal on the coil
|
|
|
|
|
Joined: Jan 2012
Posts: 1,842 Likes: 14
Moderator
|
The other thing to try, is pulling the earthing pin out of the carby, to disconnect the cutout switch.
These crude switches are notably trouble-prone, so it's best to eliminate that as a cause.
Cheers,
Gadge
"ODK Mods can explain it to you, but they can't understand it for you..."
"Crazy can be medicated, ignorance can be educated - but there is no cure for stupid..."
|
|
|
|
|
Joined: Jan 2016
Posts: 8,112 Likes: 231
SENIOR TECHNICIAN
|
"These crude switches are notably trouble-prone," Gadge would that not be the understatement of the year, I would be more likely to call it an abomination
|
|
|
|
|
Joined: Jan 2017
Posts: 21
Novice
|
ok thanks all
I will try these suggestions tonight when i get home and let you know how it goes
|
|
|
|
|
Joined: Jun 2013
Posts: 407 Likes: 2
Qualified Junior
|
LRT went through this last week, he bought 3 coils and none seemed to work. He brought them over and I was able to show him that they all worked fine. Take the coil off and clean where it mounts, but the fact it has spark means I'm doubtful this is the problem Hi Crowster36, As Norm has said, I have spent countless hours trying to get a strong enough spark to jump the spark plug gap. For your interest, here is the link to the thread detailing the diagnosis that may be helpful: Identify Victa Pro 550
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,011
Posts106,980
Members17,642
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
