Need help?


Search OutdoorKing by entering Key Words Below



Who's Online Now
1 members (NormK), 24 guests, and 170 robots.
Key: Admin, Global Mod, Mod
Online Spare Parts


Online Store


Newest Topics
Old Rover vertical pull starter cord replace
by MowingManiac - 02/03/24 04:56 PM
Victa Mounting Bolt for power Torque
by sparker - 29/02/24 01:46 PM
Scott Bonnar Nomad Information
by MickyD - 28/02/24 11:14 AM
Rattly BBT 4 stroke brushcutter
by MowingManiac - 26/02/24 06:31 PM
Topic Replies
Old Rover vertical pull starter cord replace
by NormK - 03/03/24 07:25 PM
Victa Mounting Bolt for power Torque
by maxwestern - 02/03/24 11:42 AM
Scott Bonnar Nomad Information
by QSR - 29/02/24 11:14 PM
Scammers
by maxwestern - 27/02/24 08:46 PM
Rattly BBT 4 stroke brushcutter
by maxwestern - 27/02/24 07:39 PM
Victa Walk Behind Vacuums Parts List
by Bruce - 24/02/24 11:45 AM
victa 125 muffler
by maxwestern - 23/02/24 06:41 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Joined: Mar 2021
Posts: 3
Novice
Hi All,
I have the Rancher model 1755. I have the Parts manual and owners Manuals.
I have a new belt ( A07641 ) Belt clutch drive (42). My problem is neither manual shows me how the belt runs around the pully system.
I had to get a new belt as the old one exploded and I was not able to get a photo on how they ran before hand.
So if anyone has a few photos they could post that would be great.
I live in North Brisbane, if anyone knowns a good mower shop for more help.
jamie

Membership information
Joined: Sep 2015
Posts: 2,003
Likes: 138
SENIOR TECHNICIAN & HISTORIAN
Hi Jamie

I don't have a Rancher 1755 but these images might help.


The link below some of the images are wrong where the v belt is but the text explains.
https://www.outdoorking.com/forum/ubbthreads.php?ubb=showflat&Number=44873

Cheers
Max.

Attached Images
springs-deck-3-0 jpg.png (54.74 KB, 36 downloads)
Last edited by maxwestern; 30/03/21 06:55 PM. Reason: Removed 1 wrong drawing.
Joined: May 2010
Posts: 304
Likes: 22
Apprentice level 4
Max that first diagram is a rancher 2 not a 1755, 1755 is transaxle drive. really simple as there is only 1 idler. you can see it pretty clearly in this diagram

Attached Images
1755.PNG (281.49 KB, 30 downloads)
Last edited by nath; 30/03/21 04:30 PM.
Joined: May 2010
Posts: 304
Likes: 22
Apprentice level 4
so 17 is the engine pulley, and it goes straight to #5 and then around #8 the tension idler pulley. it is spring loaded and on a linkage to the brake pedal.

You will need to take the smaller deck belt #24 off at the front to get the clutch belt on the top of the engine pulley

The whole process is easier if you remove the keepers #16 and #20

Joined: Mar 2021
Posts: 3
Novice
Nath, Thank you so much !!!

My problem was I had belt (42) on the wrong side of pully (8)
RE keeper (16) im guessing my belt (42) should be on the inside of 16 and 20 ?

Also thank you Max.

Wow what a great team, your help has saved me.
I hope to fix it all tomorrow and get my lawn done, weeds a 5 foot tall !

Lastly, spring 32 (A07745) on the cutter deck is connected only at the spring end, where does the hook end connect ? im thinking on page 2 Chassis maybe on (20) or (23) Arm rear / Arm front ?

jamie

Last edited by jamie qld; 30/03/21 06:25 PM. Reason: Added spring help
Joined: May 2010
Posts: 304
Likes: 22
Apprentice level 4
Yes, both belts need to be inside the keepers.

That spring, 32, There should be 2 of them, one on each side. one end hooks through the top of the deck housing (you should be able to see it beside the u bolt, the other should be attached to a bolt on the frame above the deck. #34 I believe. The idea is they pull the deck toward the rear of the mower to tension the deck belt.

Attached Images
7155.2.PNG (68.25 KB, 19 downloads)
7155.3.PNG (47.2 KB, 19 downloads)
full-6681-10429-img_05451.jpg (111.63 KB, 15 downloads)
Last edited by nath; 31/03/21 08:05 AM.
Joined: Mar 2021
Posts: 3
Novice
Git it, Thank you.
8-)

jamie


Moderated by  Mr Davis, prd 

Link Copied to Clipboard
Newest Members
Jacob, metal1, RovRangerAl231435, Doosty, Dano
16,773 Registered Users
Forum Statistics
Forums145
Topics12,695
Posts104,484
Members16,774
Most Online2,545
Dec 23rd, 2019
OutdoorKing Showcase
20 Bucks from FB Marketplace
20 Bucks from FB Marketplace
by Return Rider, February 20
Victa Cortina 2 Shed Find
Victa Cortina 2 Shed Find
by Return Rider, January 25
My Rover Baron 45
My Rover Baron 45
by Maxwell_Rover_Baron, April 16
SHOWCASE - Precision Mowers - 2021
SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14
SHOWCASE – Atco Rotary – Paul C - 2020
SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.4.33 Page Time: 0.018s Queries: 32 (0.013s) Memory: 0.6961 MB (Peak: 0.7593 MB) Data Comp: Zlib Server Time: 2024-03-03 09:09:50 UTC
Valid HTML 5 and Valid CSS