That lemon juice was a MacGiver idea......like on the tv show, just joking... Today I cleaned out holes in carb...... put it all back together......new fuel tube. Fueled it up.... sprayed inside the pump with penetrating fluid, to lubricate it as well as connecting a hose to the inlet. I just used the drill starter as it is easier to turn it over. Fuel was leaking everywhere, so carb needs new O rings gaskets.... But I wanted to start it so I used starter spray, it fired straightaway.....I did it a few times just to get oil moving around inside...... Then I kept it going by spraying the starter into the carb continuously.......just to hear it going. The pump work well too. speedy
........................Keep your blades sharp......................
