Hi guys, I'm having trouble with a Hydrogear Transaxle - Model:- 319-0500 fitted in my Husqvarna LTH130.
It was leaking oil badly so it was time to pull it out, strip it down and sort it all out. A pretty easy job from what it appeared.
The problem is 2 bearing shells laying in the bottom of the top case that the swashplate sits on. One was broken and the other cracked where they are attached to the case.
Here's a picture:-
The current problem is getting replacement parts and then working out how to fit them. In the above image they appear to be riveted to the case using some of the case material??
According to my local parts place they are not listed as parts in my model when they look them up.
I have them listed in some Husqvarna information I got online and even have a part number but that part number means nothing to my parts guy or even to Husqvarna Parts in Australia.
The Husqvarna paperwork I have lists the part as:-
Key No:- 7
Part No:- 532142935
Description:- Bearing, Cradle
I'm hoping that someone here has come across this problem and can shed some light on how to sort this out.
Cheers
Steve