OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Reel Lawn Mowers, Atco & Villiers etc. Vintage Greens Cylinder Mower

Hi,
I have purchased a Greens Master Lightweight Motor Mower with a 98cc Villiers 2 stroke motor? Is there a manual for the mower and motor available? Also are where can you get parts in Aust for a Villiers motor? Hope you can help
Cheers Wonka

Wonka,

Yes we do have a manual for the two stroke 98cc Villiers motor and you have access to the parts list and manuals area. If you you require more information upload just post on the forum and we will do our best to get it for you.

Thanks Bruce,
Can you tell me who can supply parts for a Villiers 98cc Mark 2 Midget engine in Aust?

Thanks Wonka

Wonka,

Here is some information on the Villiers motor part suppliers that was published in the power equipment mag.

Hi Guys I am trying to find the Villiers two stroke engine manuals, can you help me please

Hello Willo

The Greens Master Lightweight used a Villiers 98cc Midget.
The manual may be found here: -

https://www.outdoorking-forum.com.au/forum/u...3-midgets-operating-parts.html#Post61641

Hope this helps.
----------------------------------
Jack

Thank you Jack

Willo

Can anyone assist with a Greens barrel mower manual

Willo

Hello Willo
I wish I had one.
I'm sure I will find one, one day.

The record on the Master series is incomplete ...

https://www.outdoorking-forum.com.au/forum/u...reens-master-range-c1950s.html#Post63730

Cheers
---------------------------
Jack

Many thanks Jack

Willo

Hi Guys

Still working on the Greens Cylinder mower and now looking for a spark plug for the Villiers motor. It can be a Champion 8 Com or KLG ML 30, the thread size is 18mm. can anyone point me in the right direction as to why I can but one in Australia

G;day Willo

I thing a Champion D16 should do the job for 98cc Midgets.

Something like this: -
https://www.ebay.com.au/p/1689078336

Hope this helps.
----------------------------------
Jack

Thank you Jack. I will check it out

Regards

Willo

Hi jack

Just ordered the plug so fingers crossed it fits. Thank you for the information.

Regards

Willo

G'day Willo

D16 is listed in my Champion plug brochures
of the day.

It was a standard fitment for all the Villiers 98cc Midget engines.
No fingers crossed needed. It is the right plug, or my name is
not Frank Drebin.

Cheers
Jack

Hi Guys

Still working on my Greens Master Lightweight and am now starting to assemble the cutting blade into the housings with the bearings. Just want to make sure I get it correct as I did not take any in-depth photos of that assembly and was hoping someone would have a diagram of that particular part.

Hoping you experts can assist me.

Regards

Willo

Hi Guys

Further to my last e-mail about the cutting blade assembly, looks like I worked it out, but would still welcome a diagram if anyone has one.

Thank you all in advance.

Willo

Dear Jack (Frank Drebin)

I finally received the Champion D16 spark plug yesterday and yes it does fit thank you.

Willo

Hi Guys

I have another question about my Greens Cylinder Mower. Does anyone know what the thread is on the drum and cutting blade. I have been to many bolts places and they cannot work it out. I was told it was a BSF thread, but not right.

Hope someone out there can assist.

Regards

Willo

Hi Wilco,
I have no idea but if Villiers had anything to do with it, Villiers at the time way back decided they would cut their own threads which are referred to as Villiers threads