|
|
|
2 members (MarkusB, bigted),
2,989
guests, and
498
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Nov 2014
Posts: 49
Novice
|
Hi all,
A question regarding resealing the two crankcase halves. What is the correct product to use as a seal?
Thanks! Uni
|
|
|
|
|
Joined: Jan 2012
Posts: 1,391 Likes: 4
De-registered
|
They didnt come with a sealant from factory. If the surfaces have been linished or damaged then you can use one.
In anycase, I do use a sealer,Permatex Aviation" cement.
Use sparingly and if possible leave a 1 mm gap on the inner for expansion, although minor spill will not harm the engine as it does not dry.
Clean up the outer casing with turps.
This will give one of the best seals for non gasket applications.
Do not use Silicone, as over spill can break off into the engine.
|
|
|
|
|
Joined: Jan 2012
Posts: 1,842 Likes: 14
Moderator
|
Just to clarify on Blue's post, there are a few grades of Permatex gasket sealant.
The one to use is #3, the non-hardening aviation type in the brush bottle.
Cheers,
Gadge
"ODK Mods can explain it to you, but they can't understand it for you..."
"Crazy can be medicated, ignorance can be educated - but there is no cure for stupid..."
|
|
|
|
|
Joined: Jun 2011
Posts: 4,291 Likes: 4
Master Technician
|
I've always used,and have for a long long time,as far back as I can remember,I've used this: ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2015/02/full-5048-20287-loctite_sealant3_pn3ja.png)
Here for a good time,not a long time.
|
|
|
|
|
Joined: Jan 2012
Posts: 1,391 Likes: 4
De-registered
|
Yep thats him. Cheers Gadge for the clarification....:)
Spot on Blumbly, Basically the Same product just in Locktite Brand.
Been using this for over 20 years, I buy in bulk so I get the Permatex cheaper than the Locktite
Thanks Guys...
|
|
|
|
Forums144
Topics12,758
Posts106,809
Members18,138
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
|
|
