I am working on a customers PM610 that has some broken bolts. I have the bolts removed and would like to install the proper bolts back on the saw. The ones I need are on the left side of the saw that are torx head. Two are on the outside of the yellow shroud towards the bar end of the cover and could be 3/4" long. I don't have the torx head end that is broken off. There is a longer bolt that is accessable under the recoil cover that is held on by I think 4 bolts. That one is about 1 3/8" long and is tapered towards the threads under the torx head. Thanks.
