OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Chainsaws and Concrete Cutters McCulloch Chainsaws Mac 110

I am not getting a spark from my mcculloch mac 110- 10" chainsaw.
Prior to disassembly saw ran great, but would not idle. During disassembly, I found a piece of metal that has broken loose rattleing around in the muffler. This may have been my idle problem, but I have replaced the carburator.
I have removed the metal and reassembled the saw and the saw will not start, no spark.
I may not have assembled the saw correctly as some of the insulated washers on the magneto screws were in pieces and I am not sure exactly how the washers were applied to the saw.
I may not have the mag grounded properly.

Any help will be apppreciated or is a parts diagram available that will show the proper way to assemble the mag?

conky,

I have posted a parts link for you to look at. The topic is called Mac 110-120-130-160S & 3200 parts list.

Regards,

Bruce