OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames Tapered sleeve removal

Hi,

I'm dismantling my Victa 170cc twin and Im not sure how to remove the tapered sleeve on the disc side of the crankshaft.
I tried using a puller on it but it doesnt seem to want to budge.
I didnt use too much tension on it because I wasnt sure if I was doing the right thing.

Thanks, Bob

Bob,
The way that I usually get the sleeve off is by putting a large hammer on one side and hitting it with another hammer or if you have the motor off the frame you put the sleeve resting on an anvil then hit it with a hammer and this will release the sleve.

Regards,

Bruce