OutdoorKing Repair Forum Forums The History Forum Model Histories AUSTRALIAN Rotary Models SUPA-SWIFT - Parts Manual c1970s

Hello ODK history lovers

Supa-Swift began making rotary lawnmowers in the late 1950s.
They made clever and quality machines that made them a
top-player in the 1960s and 1970s.

After that, they became a small, niche player, but the name has
survived under takeovers.

This Parts Manual dates from the 1970s (best guess) and
represents the Supa-Swift line-up before takeovers.

The manual is divided into logical sections: Chassis, then
the Power Units - Briggs, Kirby and Villiers.



The chassis section covers the models 707, 727, 737, 747, 757, and 767.
It sounds like a Boeing factory!

There is also indication of factory-used names (apart from the numerical ones):
De Luxe, Starflight, Countryman, Superb, Futura and Fairmont.

The power unit sections give specific model numbers for the various engines.

This manual was in average/good condition but was time-consuming to
accurately re-produce. Nonetheless, I hope this information proves useful
for members, restorers and future historians.

---------------------------
Jack

PART TWO � Supa-Swift Chassis
As always, I make this scan available for viewing, or as
a quality download. Enjoy!

PART THREE - Briggs & Stratton Engines
Three specific Briggs and Stratton models are covered here.
Models 92908 0604, 92908 1539, 110908 0246
These are 9 Series (3.5 hp) and 11 Series (4 hp).

PART FOUR � Supa-Swift Kirby Engines
These specific Kirby model series are covered here.
Models K4 and K6 4-strokes; K7, K8, and K11 2-strokes.

PART FIVE � Supa-Swift VILLIERS Engines
The Model 140 Villiers variants are covered here.