Need help?


Search OutdoorKing-Forum by entering Key Words Below



Who's Online Now
2 members (vint_mow, looktall), 16,469 guests, and 1,879 robots.
Key: Admin, Global Mod, Mod
Newest Topics
Lombardini LA 400-510 workshop service manual
by mm-mowers - 13/05/26 06:04 PM
GXV160 clutch
by NormK - 11/05/26 08:45 PM
Victa VC 160 side pull flywheel
by Bumps - 09/05/26 02:09 PM
Image Upload Issue
by Bruce - 03/05/26 04:45 PM
Sanli height adjustment knob
by vint_mow - 03/05/26 10:42 AM
Victa 160 Pace catcher (70's model)
by Bumps - 28/04/26 05:22 PM
Victa Powercut design flaws
by vint_mow - 27/04/26 10:14 AM
Topic Replies
Victa Powercut design flaws
by vint_mow - 18/05/26 04:17 PM
Where to get wheel bearing seals?
by vint_mow - 18/05/26 03:51 PM
Sanli height adjustment knob
by maxwestern - 15/05/26 10:25 PM
GXV160 clutch
by NormK - 15/05/26 08:25 AM
Rover Tampico history question
by vint_mow - 14/05/26 10:47 AM
Lombardini LA 400-510 workshop service manual
by NormK - 14/05/26 08:27 AM
Victa VC 160 side pull flywheel
by NormK - 09/05/26 08:01 PM
Victa 160 Pace catcher (70's model)
by Bumps - 09/05/26 01:34 PM
The Online Store/Parts/Shop Is No More!!
by NormK - 07/05/26 10:15 AM
Image Upload Issue
by Bruce - 03/05/26 04:45 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
#85983 06/06/17 03:04 AM
Joined: Sep 2014
Posts: 113
Likes: 2
Apprentice level 2
My friend bought over his Rover Sprint, it has a 4 stroke B&S 375 quick start engine.
Family: YBSXS.1581VA 274460.

Said whilst mowing he heard a bang from the engine and then it stopped and wouldn't restart.

I had a quick look and found there was no compression at all when pulling the starter cord, then checked the oil level, it was bone dry.

Question, is it even worth pulling apart to check the damage (economical wise)or do I just accept it is DOA,as I have a better 4 stroke in the garage that he can have for $80 and just keep this one for spares.

Thanks
Buckets


Joined: Jan 2016
Posts: 8,188
Likes: 233
SENIOR TECHNICIAN
Hi Buckets, not worth even thinking about it but good for parts, the carby/fuel tank,coil,pull start always very handy to have, the rest is scrap

Joined: Jan 2013
Posts: 961
Likes: 20
Moderator
I agree with NormK keep the bolt on bits and scrap the rest.

Joined: Jan 2016
Posts: 8,188
Likes: 233
SENIOR TECHNICIAN
Other bits I keep from these Briggs are the starter cup and nut, the throttle control plate with the governor springs,the carb inlet tube and the breather tube. The last bit is I run the grinder through the crank and cut the blade boss off and use the press to push the bit of shaft out

Joined: Sep 2014
Posts: 113
Likes: 2
Apprentice level 2
Thanks NormK & bigted, that what I thought.

Curiosity, the mower I am going to offer him is a Viking 424 Q which has the same type of carby/fuel tank.
Would this be compatible with the 375 or would the factory settings be different due to the difference in motor size.

Buckets

Joined: Jul 2016
Posts: 129
Likes: 2
Apprentice level 2
hi buckets
those b&s sprint engines are a cheap Chinese engine, not worth time or money spent to recondition it . cheaper to just buy a new sprint engine , check the prices on ebay for a new sprint engine around $160
most mower shops just repower mowers with these engines due to ease and cheap cost
cheers

Joined: Sep 2014
Posts: 113
Likes: 2
Apprentice level 2
Thanks freebird,

He is going to buy one I have as a spare for $80

Joined: Jan 2016
Posts: 8,188
Likes: 233
SENIOR TECHNICIAN
Hi Buckets, in answer to your earlier question about the carby, I have mixed/matched/swapped countless numbers of these carbs and never had a problem

Joined: Sep 2014
Posts: 113
Likes: 2
Apprentice level 2
Thanks Norm, good to know for future reference.


Moderated by  bigted, Bruce, CyberJack, Gadge, Mr Davis 

Link Copied to Clipboard
Newest Members
Midas, duck14, Squig, FidgetMower162, Ducbert
17,960 Registered Users
Forum Statistics
Forums144
Topics12,727
Posts106,662
Members17,960
Most Online40,124
Apr 13th, 2026
OutdoorKing Showcase
20 Bucks from FB Marketplace
20 Bucks from FB Marketplace
by Return Rider, February 20
Victa Cortina 2 Shed Find
Victa Cortina 2 Shed Find
by Return Rider, January 25
My Rover Baron 45
My Rover Baron 45
by Maxwell_Rover_Baron, April 16
SHOWCASE - Precision Mowers - 2021
SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14
SHOWCASE – Atco Rotary – Paul C - 2020
SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.3.30 Page Time: 4.537s Queries: 33 (4.433s) Memory: 0.6565 MB (Peak: 0.7058 MB) Data Comp: Zlib Server Time: 2026-05-18 09:35:28 UTC
Valid HTML 5 and Valid CSS