Howdy all, my old Rover Rancher Ride-on Selector Drive has lost the spring for the transaxle jockey arm. The clutch/brake feels slack now and the transaxle belt has no tension. The trouble is I can't work out where/how to fit a new one - the diagram in the manual doesn't make it clear.
It's part 13 on this manual page. Part 2 is the jockey arm.
Looking at the diagram it looks like there is an unused third hole in the plate that would be a likely candidate for the spring to hook to, the one next to the bent up tab. Have a look there and see if there are wear marks from the old spring.
Had some time to nut this out today - pretty easy & straightforward once I took the back wheel off.
There's just a lock nut at the bottom of the bolt(36) which I think holds the spring on, then the spring just stretches over to a couple of holes on the framework.
