|
|
|
0 members (),
2,173
guests, and
207
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Oct 2007
Posts: 2
Novice
|
Hi there,
I have a victa 160cc with the black plastic carby. I was just wondering the correct position to align the white throttle poppet is when reassembling. It has the letters 'A' and 'C' and the numeral '4' stamped on it. I assume it aligns somehow with the cutout for the mainjet. Any help greatly appreciated. Thanks, Jim
|
|
|
|
|
Joined: Sep 2007
Posts: 11
Novice
|
Hi mate,
The letter C is pretty much standard if its just a normal everyday good old victa. The letters represent different mixture levels.Line the letter C spray hole and you should be right. Hope this helps.
|
|
|
|
|
Joined: Oct 2007
Posts: 2
Novice
|
Thanks for the info. I was running it with the 'A' aligned and it goes alright but seems a bit fast. I'll try it on 'C'. Thanks again, Jim
|
|
|
|
|
Joined: Dec 1999
Posts: 5,386 Likes: 34
Repair Junkie
|
jimbojones2007, If you can get hold of a black valve, that will slow the RPM's for idle. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,008
Posts106,960
Members17,634
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
