|
|
|
2 members (Red Rum, beam),
1,380
guests, and
1,086
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Sep 2006
Posts: 3
Novice
|
Hey Bruce...Ive just gotten a McCulloch Pro Mac I for free that has had the pull start cord snap. I have a new cord and have tryed to replace it but the clutch bell wont come off. Is there any specific way it needs to come off?
Any help would be apriciated!
Cheers James
|
|
|
|
|
Joined: Dec 1999
Posts: 5,421 Likes: 36
Repair Junkie
|
zzshihanzz,
Please refer to post by Duane777 for your answer. :Wavey:
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Sep 2006
Posts: 3
Novice
|
Thanks for replying so soon...you said that there would be a torx key in the center of the clutch drum...ive just checked and there doesnt seem to be one there...I just noticed that there is about 5mm of forward-back play on it
Cheers James
|
|
|
|
|
Joined: Dec 1999
Posts: 5,421 Likes: 36
Repair Junkie
|
James, The screw is hard to see. I think that it is a T20 Torx bit. If you don't undo the screw the clutch will not come off or if it is damaged you will have to cut the drum off. 
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Sep 2006
Posts: 3
Novice
|
Ok i got it off!!! with an alan key... lol thanks for helping me with it Bruce!
Cheers James
|
|
|
|
|
Joined: Mar 2007
Posts: 2
Novice
|
I am trying to get the clutch off of my 327 also, none of my torx screwdrivers will fit inside the housing.
I will try to buy a smaller one if you think it is a size 20????
Or could I just drill the head off and replace it with another screw?
Thanks
|
|
|
|
|
Joined: Dec 1999
Posts: 5,421 Likes: 36
Repair Junkie
|
hd5, All information regarding the torx screwdriver is listed under parts list & manuals area for your model. 
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Mar 2007
Posts: 2
Novice
|
Thanks
Where is the parts list and manuals?
just found this site- don't know where anything is or the rules etc.
Dan
|
|
|
|
|
Joined: Dec 1999
Posts: 5,421 Likes: 36
Repair Junkie
|
hd5, Parts list and manuals area is available to people that make a donation to the board.
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Dec 2007
Posts: 1
Novice
|
Merry Christmas to all. I have the same problem when the trimmer is most needed!!! I thought that an Allen key would do the trick but inspecting the area more closely, the hole seems to be either very small or shallow!
What type of donation are we talking about Bruce to get to the parts list and manuals?
|
|
|
|
|
Joined: Dec 1999
Posts: 5,421 Likes: 36
Repair Junkie
|
Andre, You need a Torx screw drive in order to get the clutch of and they say in the manual either a T25 or T27. As to the manuals area if you click PayPal donate button you will get access to the parts list and manuals area under questions on trimmers & brushcutter.
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
Forums145
Topics13,089
Posts107,395
Members17,940
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
|
|
