I have an ATCO 14" Suffulk engine mower with a Zenith carby. The problem is that the engine starts and runs for about 10 seconds then dies. I have cleaned the carby, put in new petrol and checked petrol is getting to the carby. I have also tried to adjust mix and idle screws in the 10 seconds but it still dies. Any help appreciated.
I have manual on the Atco 14" with 4/Stroke motor. It tells you what setting for the carby etc(21 pages). I can e-mail you the document but would have to charge $10-00 for scanning.
Regards,
Bruce
Regards,
Bruce
Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
if you have a reel mower thats a 98cc atco or villiers its probobly in the magnito(the big metal drum behind the piston) they were never really goo or it need new rings which are like imposible for you to find in good nick
kcb_1983 , thankyou for the information, but as this thread is clsoe to 8 years old I will close it to encourage anyone else to start a new thread. Thanks Joe.