OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Question On Scott Bonnar Cylinder Mowers Height adjuster -removal

Hi
This may be a really dumb question, but how do I remove the height adjuster of the front roller.

I have tried to unwind all the way, hoping the top adjustment handle is freed from the long bottom piece without any luck.

This is from my Scott Bonnar 45 I'm rebuilding

OK sorry I can't I answer you question no experience with those guys,but I just wanted to comment.The only dumb question is the un-asked question. Especially here,it won't be long and someone will be able to help you with that problem.Sorry I can't.

Hi Barry Jnr
There is a little Horse Shoe shaped Cir clip just below the spring It holds the spring and washer in place. If you use a srew driver you should be able to pop this off. The spring and washer will then become loose. Then you can just wind the height adjustment handle all the way off.

Hope this helps.

Jason

Thanks Jason . I had the clip out, but just didn't want to budge. Brute force got it out...