|
|
|
|
|
Anonymous
Unregistered
|
my mower won't start.spudders a little.solid state ignition.when pull starting,every third or fourth pull, handle will jerk back out of my hand very hard.please help. thanks Todd
|
|
|
|
|
Joined: Mar 2000
Posts: 9
Novice
|
Sounds a bit like my mower (see my other msg, re: briggs&stratton), when the rope yanks your arm back, the timing is probably out. The method of correcting the timing will depend on the brand & type of your engine.
|
|
|
|
|
Joined: Mar 2000
Posts: 119
Apprentice level 2
|
Your flywheel key is sheared, change
it and you should be ok
Bill Greer
|
|
|
|
|
Joined: Apr 2000
Posts: 5
Novice
|
hello there
you will have to replace your flywheel key
------------------
C.MacMartin
[This message has been edited by Bruce (edited 29 April 2000).]
C.MacMartin
if you have any other questions please contact me a masterc@xtra.co.nz
|
|
|
|
|
Joined: Dec 1999
Posts: 5,419 Likes: 36
Repair Junkie
|
Tod,
Everyone that has answered your problem is correct but I would also check that the blade holder key as it could also be sheared or the blade plate could have a crack in it which will also put the timing out. Not many people know of this problem as they will go straight to the flywheel key because it is also the first to go but if it hasn't then check what I suggested.
Regards,
Bruce
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
Forums145
Topics13,080
Posts107,356
Members17,913
| |
Most Online16,069
Sep 18th, 2025
|
|
|
|
|
|
