|
|
|
6 members (Red Rum, Dandare, 1Clint, Greg1402, NormK, cjpony),
5,311
guests, and
1,535
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: May 2009
Posts: 106
Apprentice level 2
|
Hi Bruce While waiting to obtain funds to complete the Mark 3 lawnmower I have started to work on my Victa VC 160 Mark 4 lawnmower. The mower runs fine (starts first pull) but when set to grass cutting speeds very fast and sounds like it is going to blow up. There is a wheel that you can turn on the carby that says idle adjustment, do I use this to change the revs when the mower is running?  VC Victa
Last edited by VC Victa; 16/06/09 11:24 AM.
"You can't beat a good old Victa 2 stroke"
|
|
|
|
|
Joined: Dec 1999
Posts: 5,433 Likes: 36
Repair Junkie
|
VC Victa, No you do not use the knob on the carby it is only for the idle speed. The bet is that you could have a damaged 'O' ring on the spout that the carby locks onto or you might have a leaking top seal.
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: May 2009
Posts: 106
Apprentice level 2
|
How do I check the seals, do I need to remove the carby from the mower? VC Victa
"You can't beat a good old Victa 2 stroke"
|
|
|
|
|
Joined: Dec 1999
Posts: 5,433 Likes: 36
Repair Junkie
|
VC Victa, You need to remove the flywheel and then put some petrol (fuel) on the top seal of the shaft and if it bubbles (or just disappears) then the seal is leaking.
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: May 2009
Posts: 106
Apprentice level 2
|
Hi Bruce I discovered that the head casket was stuffed and the cylinder head threads that hold the spark plug in place were worn out, also the decompressor was not working properly. I have rebuilt and replaced relevant parts and now runs well, still a little fast.
"You can't beat a good old Victa 2 stroke"
|
|
|
|
Forums144
Topics12,738
Posts106,722
Members18,008
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
|
|
