I recently purchased an Ogden power push mower, probably a motormatic . I am after a catcher or a diagram showing measurements of the catcher, any help would be appreciated. Thanks John
I had a Pope and a Ogden reel push mower and got a catcher at a tip shop for $5. for the Pope but was thinking it wouldn't be that difficult to change the brackets on the Pope catcher to make it fit the Ogden,
Pope and Ogden push mowers aren't worth much ,I couldn't get $20. for the 2 mowers with a catcher, if you look around you will eventually find a cheap catcher as the high priced mowers never sell.
Not sure if anyone here has a Ogden catcher to get the measurements, you could try a Facebook mower group if need be.
I've seen these push reel mowers not sell for $20. at a garage sale and they just throw them out with the rubbish.
Yes it looks like it would be quicker to modify a Pope catcher than try to locate a Ogden catcher, it shouldn't be too much trouble to shorten the catcher to fit ,a few images from online to see the shape of the brackets.
Another thing I didn't mention before was the Pope has a deflector plate when the grass catcher is used to make collecting grass more efficient ,you could make a deflector plate if need be ,I've used push mowers without the deflector plate and the catcher still got filled with grass, the Ogden looks to have a deflector plate too when using a catcher.
