Need help?


Search OutdoorKing-Forum by entering Key Words Below



Who's Online Now
0 members (), 2,569 guests, and 449 robots.
Key: Admin, Global Mod, Mod
Newest Topics
Early Morrison rotary mower
by Hawkeye - 01/03/26 10:20 AM
Rebirthing a Honda 12 volt solenoid
by MowingManiac - 19/02/26 09:57 PM
Victa SPX 2342 - Blue Model - Belts Help
by Steve_2012 - 18/02/26 10:24 AM
GXV390 chaging oil with vacumm pump.
by leslloyd - 12/02/26 05:44 PM
Add electric power to push reel?
by MikeDD - 12/02/26 09:45 AM
Greenfield Drive belt keeps twisting
by portabletelly - 10/02/26 05:53 PM
Sydney Roller Mower Centre: Seven Hills, NSW. 2147
by mice_elf - 07/02/26 07:16 PM
Topic Replies
Victa SPX 2342 - Blue Model - Belts Help
by Bruce - 02/03/26 09:37 PM
Early Morrison rotary mower
by Hawkeye - 02/03/26 02:58 PM
Add electric power to push reel?
by MowingManiac - 25/02/26 07:19 PM
Rebirthing a Honda 12 volt solenoid
by NormK - 22/02/26 02:31 PM
Greenfield Drive belt keeps twisting
by Bruce - 20/02/26 12:02 AM
GXV390 chaging oil with vacumm pump.
by leslloyd - 18/02/26 02:59 PM
Sydney Roller Mower Centre: Seven Hills, NSW. 2147
by mice_elf - 17/02/26 07:37 PM
Suzuki 2 stroke - doesn't start after rebuild
by Bruce - 16/02/26 12:06 AM
Rover Thoroughbred Model 85
by Bruce - 15/02/26 11:59 PM
Suzuki 2 stroke - doesn't start after rebuild
by Bruce - 15/02/26 11:49 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Joined: Sep 2001
Posts: 1
Novice
I haven't used my chainsaw for about 4 years, and never had an owners manual. I think that the right gas/oil mix is 32:1, but the "authorized dealers" I spoke with didn't keep manuals for ancient chain saws. Anyone know what a HOMELITE XL-12 needs for the gas/oil mix?

Joined: Aug 2001
Posts: 2
Novice
My homelite dealer told me 16:1. However, the previous owner used 40:1. I have used both and only see slight differences in performances. Since the saw is quite old, I'm not sure how much damage has been done (if any). I will keep running mine at which ever is on hand until It dies. then I can buy a newer, safer saw.

Joined: Sep 2001
Posts: 4
Novice
I run my homelight on a 25:1 mix it runs fine and it doesn't run hot.

Joined: Sep 2001
Posts: 1
Novice
This was my question, and I finally found a dealer that was able and willing to answer. In the old days, standard motor oil was used with gasoline. The mechanic said that the old rule of thumb was to add an 8 ounce coke bottle of oil to a gallon of gas (128oz/8oz, or 16/1). Modern 2 cycle lubricants are better, so less oil is needed. I was told that 40/1 was probably OK. I won't run less oil than 32/1, and will probably run 24/1 on my next mix.....just because I don't ever want to buy another saw if I only use it for 10 hours a year.

Joined: Nov 2001
Posts: 67
Trainee
I have access to most HOMELITE Owners Manuals & Parts Books.
BTW HOMELITE originally used 16:1 oil, then added 32:1 in the 1960's +/-. They now only sell 32:1 & EXACT MIX, which is 2.6 oz to a gallon or 4 liters


I am a current oldtime HOMELITE dealer with an extensive inventory of NEW, NOS & USED parts.
Check or credit card thru PayPal at https://www.paypal.com/

Shipping is free for parts over $50 within the contintal US...Will evaluate any others

I accept Money Order or PayPal:

Bill Walcott
Brauchi Bros Inc-almost 50 yrs with HOMELITE
700 N 12th
Marysville KS 66508 USA
785-562-3539
Joined: Aug 2005
Posts: 1
Novice
Quote
<font face="verdana,arial,helvetica" size="2">Originally posted by WM_R:
I have access to most HOMELITE Owners Manuals & Parts Books.
BTW HOMELITE originally used 16:1 oil, then added 32:1 in the 1960's +/-. They now only sell 32:1 & EXACT MIX, which is 2.6 oz to a gallon or 4 liters
</font>

I can't find the model # of my Homelite Super XL. Do you know where to find what model it is?

Thanks, Kevin


Moderated by  Bruce, Mr Davis 

Link Copied to Clipboard
Newest Members
Wayneo888!, Gerald the draught, spud 1, Ilia, Pugsley
17,869 Registered Users
Forum Statistics
Forums145
Topics13,068
Posts107,298
Members17,869
Most Online16,069
Sep 19th, 2025
OutdoorKing Showcase
20 Bucks from FB Marketplace
20 Bucks from FB Marketplace
by Return Rider, February 20
Victa Cortina 2 Shed Find
Victa Cortina 2 Shed Find
by Return Rider, January 25
My Rover Baron 45
My Rover Baron 45
by Maxwell_Rover_Baron, April 16
SHOWCASE - Precision Mowers - 2021
SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14
SHOWCASE – Atco Rotary – Paul C - 2020
SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.30 Page Time: 0.037s Queries: 25 (0.028s) Memory: 0.6399 MB (Peak: 0.6741 MB) Data Comp: Zlib Server Time: 2026-03-03 17:06:04 UTC
Valid HTML 5 and Valid CSS