So I managed to get everything pulled apart today. Pic below...
Only question now is: Will I be able to put it all back together again lol!
At this stage its really just the clutch cork and thrust bearing that need to be replaced, everything else is dirty but sound. One bolt holding the front roller on got chewed up in the tear down, but that's fairly minor and easily resovled.
Next steps are to de-grease and wire brush all the yucky stuff and work on prepping the chassis and other parts for painting.
Probably going to take several weeks now as this is all the painstaking stuff.
All that's going through my mind is that my Pappa (Grandfather) would probably think i'm nuts for going to this extreme, but I think it will be worth it in the end... hopefully lol!
