Originally Posted by grumpy
GRB, note you are also missing the anchor fitting that has to attach the inner wire of the speed control cable, to the speed control lever on the governor: see green circle in picture:

[Linked Image]

Sometimes a cable with a single-wire inner is used, with a Z-bend in the end to engage the hole in the lever, or sometimes a more complicated gadget with a grub-screw, and a pin going through the hole in the lever. You can get something suitable from your local mower shop.

Hi grumpy,

Sorry to bring up an old thread but do you have a picture of how the governer linkage should be set up, including springs?

Cheers
Brad