Originally Posted by Cartman123
Well.... After mucking about with the needle, float, hoses... She starts and runs! and no leaks..... smile But only for 30 secs or so before dying... frown

So fuel / Air is coming in, and the spark's fine.... not sure what's going on now...? If I slow it down on the throttle, say half way, it takes another 10 or 15 secs longer before dying again...

Some joy...but still frustrating... help.....

1. Ok how is the fuel flow from the tank to the carby?

2. Have you checked the 'O' ring on the intake sleeve (the piece that the carby locks onto).

3. Did you check the screw (main jet) for the carby to see if it is clean?

4. Before the machine stops does it rev high?

Answer these so that we can give you the correct answers. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.