Ok Cartman123 if you don't have spark with the throttle in the run position then you will be pulling without results.

To test for spark what you need to do is connect the spark plug to the high tension lead then hold the plug against the metal part of the engine and pull the starter rope.

As to the screw on the primer cap it has nothing to do with your problem.

One other thing is to make sure that the petrol/fuel that you have is no older than 8 weeks from time of purchase.

Have you checked out the parts list and manuals area as it has the workshop manual for repair? cheers2


Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.