Hi
Here is the problem on Greenfield E2000 MKII clutch.

neutral position
[Linked Image]

Reverse
[Linked Image]

forward
[Linked Image]

the yoke who move the drive plate is traveling a couple of centimeter before been able to push the plates. resulting in reverse been between very slippery to not working at all as the pedal travel all the way back before pushing on the disk.

forward is fine as the yoke is pushing without delay on drive plate.
help2 thank you

jerome

Last edited by CyberJack; 25/04/16 02:59 AM. Reason: Topic heading.