OutdoorKing Repair Forum Forums Restoring, Customising and Modifying Tech Talk Rover Suzuki 2 Stroke

Hello,
Things I have tried, to stop the engine hunting. please see image below.


Things I have tried to stop hunting:-
#Red arrows: try changing the engine speed by 150 rpm, try the top and bottom holes. with care you can do this without pulling much apart, I use offset point nose pliers with the governor spring relaxed.

#Green arrow: Move the governor arm one spline on its shaft closer to the carby. To get the governor arm off, undo nut then spread slot with a flat tip driver(yellow arrow) then pry it off with a large flat tip from behind. To make it easier remove the governor plate (blue arrow) 2 x 10mm bolts from memory.

I bought a mower off an ex mowing contractor of 20 years, he used Suzuki's, he used to drill the jet out, I don't know the fine details.

Here are some other images for this thread.




For those who haven't been in side one of these.



Here are my 3, all mounted up on 21 inch Big Bob bases.