Originally Posted by Peter J
Well Blower number one is now running just about perfect. Starts easily good idle and full speed without bogging down.

Bruce thanks for your advice on the fuel filter. That was the problem. I also used a bit of carb cleaner and now she's running perfectly.

I am fairly sure I have the mixture screws adjusted right, however Id appreciate an explanation if the more wiser members wish to share.

For $20 all up its a bloody good blower.

Fuel mix is 25/1 right?

Phot of the finished product all clean.
[Linked Image]


Thanks

Peter,

As always the moderators and myself try to explain things in detail in order for members to save money but as stated before you must follow the procedures to the letter. As you found out after our phone call you saved your self the expense of a diaphragm kit (about $25-30).

Also to new members a detailed explanation of what has been done can save everyone a lot of time and money.

I will now close this thread as the problem has been solved. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.