Limited with wrists in splints I managed to get a lot done today.
For Rodeobob I have some pictures of the engine mount plate - the bolts are in one set of holes so there are 8 holes in total to choose from.
[Linked Image from img.photobucket.com]

Here is a series of the gearbox and drive axel - both in and out of the frame.

[Linked Image from img.photobucket.com]
[Linked Image from img.photobucket.com]
[Linked Image from img.photobucket.com]
[Linked Image from img.photobucket.com]

I proceeded to strip anything bolted on and cleaned them up on the wire wheel.

[Linked Image from img.photobucket.com]

[Linked Image from img.photobucket.com]

Gave the deck a going over with the flapper disk - a coat of primer them a top coat.

[Linked Image from img.photobucket.com]
[Linked Image from img.photobucket.com]
[Linked Image from img.photobucket.com]

I've given the belt cover a going over with paint stripper but it needs more - same with the frame ( can't use the sandblaster with my wrists as the gear is down under the house and I can't get it up to the garage) I plan to give all the separate pieces one top coat of yellow then assemble it all and give it a second coat assembled. I'm using KillRust epoxy paint.

Last edited by David L; 26/01/12 10:03 PM.