OutdoorKing Repair Forum Forums Repairs and Maintenance Questions On Ride On Mowers Questions On Ride On Mowers Frames Jacobsen Ride on for the Archives

Rear end view.


Rear end with the rear cover removed. The square tube assembly is what I temporarily manufactured to support the axle centre.


The underside.


Steering components.


The drive end. The large spring is for the clutch return, with a gas strut, and the small spring is for the cutter deck lift.


A close up.


Another close up. Note the wear point on the dif hub.


Deck lift assembly, pedal shaft (thick shaft), and front end control arms.


Close up of steering components. Die cast alloy steering quadrant.


The underside overall layout. The chassis flex points can easily be seen by the absence of paint the areas beside the gearbox pulley.


The deck lift components.


The steering pinion and quadrant, both die cast alloy.


The pedal shaft.


Safety info on the chassis.


The top side layout.