Originally Posted by maxwestern
G'day Harry,



OutdoorKing have a rebored engine for $80.https://www.outdoorking.com.au/clearance-items/victa-power-torque-rebore-err1352n

PowerTorque manual https://www.outdoorking-forum.com.a...del/Power%20Torque%20Engine%20Manual.pdf

Cheers
Max.

Hi Max,

Thanks for the Manual. much appreciate it.



An Update,

The Old man got a 2 Stroke Lawn mower from his friend.

It is a Victa Pace Model PAS201G.

It has no Decompressor installed. There is no hole for a Decompressor at all.

The Lawnmower seems to have been taken to a repair shop that said it is not repairable. (Compression???)

The first thing I noticed was it has the white carby cover on 90 degrees from horizontal. Easy fix anyway.

It had its pull cord mechanism pulled off, so I could see the Piston rod. The whole area was pretty clean, so it doesn't seem to have sucked in any dirt.

I decided to put it together and see what its compression was.

Since it has no decompressor there was no need to plug the hole with a Spark Plug.

After pulling the Cord 5 times, the Gauge reaches 60 PSI.

It isn't 80-100 PSI but better than 35 PSI I get from the old motor.

My question is do I proceed overhauling the Carby and installing the Float Lever and testing.

I know Maxwestern mentioned no lower than 50 PSI.

Or do I wait to find another lawn mower with a better compression.


Thanks
Harry

Last edited by Hazzaman; 01/03/25 10:50 AM.