Hello
We've been given an old victa 2 stroke mower (lots of posts seem to start with that sentance!). Model number is PAS201H
Im told it runs well but the pull start does not retract all the way. The previous owner said he left the fuel tank loose and would wind it back in by hand once started.
Im guessing there is a spring in there somewhere that needs attention but cant figure out how to get to it. There is a nut at the end of the crankshaft and three bolts that hold the plate on which the pully is mounted to the crank case. I'm a bit nervous about attempting to remove either of these. Any advice or any info about this model of mower would be great.
Josh