|
0 members (),
1,111
guests, and
190
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2011
Posts: 8
Novice
|
Howdy all,
Scored an early 80's Vortex power-torque jobby in bits. (You know, someone pulls it apart, can't remember how it goes back together, sticks it all in a big bucket and gets rid of it.....)
Anyway, got it all back together and had two screws left over. I'm not a huge fan of having stuff left over from a rebuild/re-assembly so carefully pulled it back apart and realised there should be some sort of heatshield in front of, or around, the muffler. Has anyone got any photos of what the heatshield looks like? It looks like I'm going to have to scratchbuild something to keep the heat from ruining that nice Vortex yellow cover.....
Cheers!
GTG!
And remember..... She's GoodToGo!
|
|
|
|
|
Joined: Feb 2015
Posts: 269 Likes: 3
Apprentice level 3
|
your right GTG, it's a fair lump of casting that fits over the exhaust and hooks onto the starter,
not worth trying to make, they shoudn't be to hard to find, in fact there will be one on the
old vortex i have out the back.
i'll post a pic tomorrow if someone doesn't beat me to it...
I always come back to an Echo
|
|
|
|
|
Joined: Mar 2016
Posts: 43 Likes: 1
Novice
|
Seems weird but there seems to be one laying on the ground next to my feet 
|
|
|
|
|
Joined: Mar 2016
Posts: 43 Likes: 1
Novice
|
|
|
|
|
|
|
Joined: Mar 2016
Posts: 43 Likes: 1
Novice
|
Left hand side is the bracket that will hold the tank and sits underneath the rear of the heat shield holding it up off the engine fins and away from the decompression unit
Last edited by Lennyb; 10/04/16 04:14 AM.
|
|
|
|
|
Joined: Sep 2011
Posts: 1,374
know nothing
|
and be sure the decomp' plastic fitting is allgood while its pulled down lenny b . they have a habit of getting a tad singed and fall out or to be sure just replace it 
|
|
|
|
|
Joined: Mar 2016
Posts: 43 Likes: 1
Novice
|
This ones not going back together vc, it's been sacrificed to the victa gods due to a smashed up cowling, and chassis  so if you're interested in the parts GTG, give me a yell and we can sort something out 
Last edited by Lennyb; 10/04/16 09:18 AM.
|
|
|
|
|
Joined: Apr 2011
Posts: 8
Novice
|
Thanks for the info guys! If you were around Melbourne Lennyb I'd definitely take you up on your offer. Anyway, I fished out the tinsnips and hammer and belted some metal into a heatshield.... Works well! ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2016/04/full-4940-28113-20160410_131741_lls.jpg) ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2016/04/full-4940-28114-20160410_131726_lls.jpg) I might have to fashion a piece to cover the side of the muffler though...... Cheers! GTG!
And remember..... She's GoodToGo!
|
|
|
|
|
Joined: Mar 2016
Posts: 43 Likes: 1
Novice
|
Looks good mate! Fair bit of metal work there, I'd be proud of that, came up good!
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,011
Posts106,980
Members17,645
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
![[Linked Image from imagizer.imageshack.us]](http://imagizer.imageshack.us/v2/150x100q90/923/2rvtEq.jpg)
