OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions on Other Engines DANARM Drillmaster with LAUSON diaphram carburetor

This engine was found at a recycle center minus carby.


I have found another broken engine (crankshaft) with a carby attached. Sadly, the petrol pump balloon in the carby is split.
Carby and split balloon below.


I would appreciate any information on OEM or after-market replacement parts in Oz. TIA.

That would translate to be a Tecumseh 631135 carburetor if my manufacture number to part number is correct.

Thanks AVB. Postage from the US to Oz ranges from $22.00AU to $40.00AU for the Pump Element and that is why I'm trying to source it in Oz. Appreciate the Tec part number but it still doesn't help here, darn it.

Can you source the part in the UK? Postage was cheaper and faster from there for me, for unrelated items I must admit, at least over the past few years. Even purchasing from the USA through the UK Ebay site may have cheaper postage/prices.

Understand the shipping problem we have same the problem when Canadians order parts from the USA the tariffs are killers.

It doesn't make any sense as Husky 350 chainsaw crank seals cost me $20 including shipping from China. Here I can't get even get them unless I order the bearings at $30 each plus shipping. They act like we too stupid to press the seal off and on the bearing ourselves.

Another thing I am seeing lately is the OEM fuel line kits which includes things not even needed most times when simple bulk fuel line would do. An example of this is a Ryobi blower I just finished. They want over $30 for the fuel lines, filter, and primer bulb plus the shipping. Using the bulk fuel line (18"), Walbro OEM primer, and Zama metering diaphragm cost a little under $5 plus prorated shipping. I usually order in volume where I can get free shipping.

Wish you best of luck finding a reasonable source for the parts.