|
|
|
|
Joined: Nov 2006
Posts: 20
OP
Novice
|
dose any one know the carb settings
for the adjustment screws on a mcculloch eager beaver trimmer
|
|
|
|
|
Joined: Aug 2007
Posts: 549
Chainsaw Addict
|
The procedure is as follows for a walbro carby.
Step 1: Bottom both screws.
Step 2: Back off the 'H' (high) screw one turn.
Step 3: Back off the 'L' (low) screw one and a quarter turns.
Step 4: Start machine then open 'L' screw till you do not have any hesitation (or very little) going up to full RPM'S.
Step 5: On full thrittle adjust till the machine is running at maximum RPM'S and then back off the 'H' screw by 1/8 of a turn.
|
|
|
|
|
Joined: Dec 1999
Posts: 5,360 Likes: 34
Repair Junkie
|
It is really great that members like yourself (gmax) help other members with the correct information and good advice. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 10
Administrator - Master Technician
|
Well said Bruce, good work gmax!!  
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl 
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics12,899
Posts106,303
Members17,321
| |
Most Online2,545
Dec 23rd, 2019
|
|
|
|
|
|
