now after all that i need your help
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2016/02/full-9141-27113-dscf5646.jpg)
i was going to just try and join another sparkplug lead too see at least if i have spark( which i doubt) then i will take the flywheel off and have a good looksee.
i looked into the bore with a torch and the domed top piston? was flat from crap. the bore and the piston and rings looked great. i dont want to mess this one up lads.
someone had drilled a wheel out and sleeved the axle
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2016/02/full-9141-27114-dscf5653.jpg)
why does the motor have holes for a cowl to be attached.
i have seen this before
![[Linked Image]](https://www.outdoorking-forum.com.au/forum/uploads/usergals/2016/02/full-9141-27115-dscf5655.jpg)
what would be the best way to bring this machine back to life(without using a hammer?)thanks for putting up with my long post,
WHAT COLOUR.
sean
and one more question, WHAT COLOUR?