OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Victa Two Stroke Engines Where to source Wipac coil for my Roto Victa

Looking for another coil, condenser and points for my Victa 18 Roto mower.
Mine has Steel wheels with rubber tyres.

I'll post a pic as soon as I figure out how to.

Thanks
Jeff ( moodyblue933@hotmail.com )

Hi MoodyBlue, and a warm welcome to the forum. It's great to have you onboard.
We have a lot of members here that are interested in the early Victas especially the Rotomo's. Can you please post your engine number or include a shot of it in your pics. This will help in dating your machine and be good for the forum archives.
Instructions for uploading pic using the inline uploader can be found HERE

Once again Jeff, to Outdoorking

Engine Number is 70268.

Steel wheels with rubber tyres.

Surely there must be someone that has one for sale, or knows where I can get one of these coils from.

Hi MoodyBlue I can tell you from the engine number it is a model 2 rotomo. Whether it has all its original parts on it is a different question. Now it's not about anybody knowing anybody that has the parts you need it's whether they will sell them. I mean these are getting hard to find parts and their are guys on here that do have. Like myself but I'm not up to selling any as once they are gone it becomes hard to get them again. So just have to have patients you will find one at some point.

can anyone supply the wipac part number and/or a picture of the coil as it may be the same as some Villiers coils. regards,john

Ok I can do that for you this afternoon when I get home. Sorry I can't help with the bits you need but I can help with details.

Sorry voljon I did post up some pictures but I put it in wrong topic I will fix it up this afternoon.

Hi guys, if all else fails, you may be able to source one from HERE

OK voljon sorry I did put these pictures up in the wrong topic but here they are now so you have a better idea at what to expect when the flywheel comes off.



Coil assembly.

Condenser.


My favourite part serviceable points.What a fantastic idea.Should have stuck with that idea.


I hope this helps.I'll have a look for parts numbers soon for you.

many thanks blumbly for the pictures.i hope you have some success in getting the wipac
part numbers.there appears to be a number cast into the backing plate but I cant quite
make it out. regards,john.

OK sorry for the delay I almost forgot about it.
This is couple of pages from the green-book.Has the part numbers etc.Hope this helps you out.If you require more help just ask.Happy to help.

blumbly,thanks for that,but if possible could you please post the numbers cast on the backing plate opposite the cast "wico"and any numbers on the flywheel as I think the part numbers on the list are victa numbers.regards,john

Sorry their voljon I thought you were after the Victa numbers.Their really isn't a lot of numbers that could be much use to.The number on the ignition plate to me looks more like a cast number,I think a patent number,maybe.Which is P2123. Their is a Spec No Fw (Whatever that means) 1391.Then a serial number (Which would be different per item) this one is 414159.Flywheel not much that I can read on this one.The cast number of which would be a patent number (I think) is P2124,but in saying that their is a Pat no (which also could be a patent number)(I really don't know).The Pat No is 491.110.Their is some other number but I can't read on this flywheel I didn't get time to check any others.Their is no numbers on the coil set up or points and condenser.
I'm not sure that this will be of any help.

Apologies Blumbly,
You've added a lot of detail and it is much appreciated. Looks like fabrication time to keep this one going (not used, but running so it can be started occasionaly)
Regards
Jeff (Moody Blue)