Need help?


Search OutdoorKing-Forum by entering Key Words Below



Who's Online Now
1 members (1 invisible), 2,569 guests, and 901 robots.
Key: Admin, Global Mod, Mod
Newest Topics
Victa SPX 2342 - Blue Model - Belts Help
by Steve_2012 - 18/02/26 10:24 AM
GXV390 chaging oil with vacumm pump.
by leslloyd - 12/02/26 05:44 PM
Add electric power to push reel?
by MikeDD - 12/02/26 09:45 AM
Greenfield Drive belt keeps twisting
by portabletelly - 10/02/26 05:53 PM
Sydney Roller Mower Centre: Seven Hills, NSW. 2147
by mice_elf - 07/02/26 07:16 PM
Suzuki 2 stroke - doesn't start after rebuild
by SuziRova - 01/02/26 09:22 PM
Suzuki 2 stroke - doesn't start after rebuild
by SuziRova - 01/02/26 09:16 PM
Topic Replies
Greenfield Drive belt keeps twisting
by NormK - 18/02/26 04:22 PM
GXV390 chaging oil with vacumm pump.
by leslloyd - 18/02/26 02:59 PM
Victa SPX 2342 - Blue Model - Belts Help
by Bruce - 18/02/26 01:10 PM
Sydney Roller Mower Centre: Seven Hills, NSW. 2147
by mice_elf - 17/02/26 07:37 PM
Suzuki 2 stroke - doesn't start after rebuild
by Bruce - 16/02/26 12:06 AM
Rover Thoroughbred Model 85
by Bruce - 15/02/26 11:59 PM
Suzuki 2 stroke - doesn't start after rebuild
by Bruce - 15/02/26 11:49 PM
Add electric power to push reel?
by MikeDD - 12/02/26 09:45 AM
Victa Corvette 4016
by Bruce - 10/02/26 07:53 AM
Cox ride on
by NormK - 04/02/26 08:14 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
#37274 22/05/12 09:04 PM
Joined: May 2012
Posts: 14
Novice
Hi, my grandson was helping me the other day to mow a lawn, I told him to check the oil and top it up if it need it. I then saw smoke coming out of the exhaust when he was using it. I stopped him and checked the oil and it was over full by about a litre, I removed the excess oil and restarted mower, was fine then. Now tho when I startup first time it blows a large cloud of blue smoke, it then clears and it fine untill you stop it and leave it for a few hours and it will blow smoke. If you restart after 10 mins no smoke.
Any idea what it maybe.
Thanks

Joined: Jan 2009
Posts: 6,926
Likes: 10
Pushrod Honda preferrer
***
Hi David, welcome to Outdoorking.

After running that mower in an over-filled condition there will be oil in the crankcase ventilation valve and through the breather hose. Some of that will have to be burned rather than draining back into the crankcase. My guess would be that may be what is happening. If it had a litre too much oil though (i.e. about three times the correct amount of oil in it) there will have been some pretty ugly solid chunks of liquid being violently hurled around in there when it was running and it is possible that damage has been done. It wasn't designed to pump solid oil like a hydraulic pump, and on the underside of the piston and rings at that.

I suggest you watch the oil level carefully - even a very small amount of over-filling, due to checking the oil on ground that isn't quite level, can result in oil being blown into the breather system every time you run it.

Joined: May 2012
Posts: 14
Novice
Hi Grumpy,

Thanks for that, I was estimating a litre it may have been only 1/2. Yesterday I decided to pull the air filter housing off and cleaned it out. I also replaced the Air Filter. I started it up last night and no smoke, will try again later on today and see if it blows any smoke. It may have pumped oil back up the air filter and housing. Will keep you informed. Thanks


Moderated by  bigted, Bruce, CyberJack, Gadge, Mr Davis 

Link Copied to Clipboard
Newest Members
ChrisNO, Cliff Tracy, The Todd, jtw37, Rod Browning
17,856 Registered Users
Forum Statistics
Forums145
Topics13,066
Posts107,278
Members17,856
Most Online16,069
Sep 19th, 2025
OutdoorKing Showcase
20 Bucks from FB Marketplace
20 Bucks from FB Marketplace
by Return Rider, February 20
Victa Cortina 2 Shed Find
Victa Cortina 2 Shed Find
by Return Rider, January 25
My Rover Baron 45
My Rover Baron 45
by Maxwell_Rover_Baron, April 16
SHOWCASE - Precision Mowers - 2021
SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14
SHOWCASE – Atco Rotary – Paul C - 2020
SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.30 Page Time: 0.037s Queries: 21 (0.031s) Memory: 0.6250 MB (Peak: 0.6484 MB) Data Comp: Zlib Server Time: 2026-02-18 22:08:38 UTC
Valid HTML 5 and Valid CSS