OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames No Spark ...

Hi,

I've just replaced the carby after cleaning and replaciing o-rings. It doesn't leak. However, now I have no spark. I've removed both wires from the carby (in case they were not properly installed) - still no spark. the various wires seem ok - no broken insulation, connectors still firm.

Any idea? Thanks.

Mike@Narellan,

What type of engine is it? Power Torque / 125cc or 160cc.

If it is a power Torque I would be checking the electronic module to make sure that it is not loose which will give you a bad earth.

[b]Victa Power torque Electrical information[/b]

Regards,

Bruce

It's a 160cc, green Conquest (I think that was its name) about 1987 vintage. The electronic module is secure - appears to be riveted on! Not sure how you'd replace it.

Thanks.

Mike@Narellan,

Is the module a gold colour? If so I would replace it.

Click on this link for information:

[b]Victa old Electrical information[/b]
Regards,

Bruce