|
|
|
|
Joined: Oct 2005
Posts: 4
Novice
|
Hi,
I've just replaced the carby after cleaning and replaciing o-rings. It doesn't leak. However, now I have no spark. I've removed both wires from the carby (in case they were not properly installed) - still no spark. the various wires seem ok - no broken insulation, connectors still firm.
Any idea? Thanks.
|
|
|
|
|
Joined: Dec 1999
Posts: 5,407 Likes: 35
Repair Junkie
|
Mike@Narellan, What type of engine is it? Power Torque / 125cc or 160cc. If it is a power Torque I would be checking the electronic module to make sure that it is not loose which will give you a bad earth. [b]Victa Power torque Electrical information[/b] Regards, Bruce ![[Linked Image]](https://www.outdoorking-forum.com.au/board/biggrin.gif)
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Oct 2005
Posts: 4
Novice
|
It's a 160cc, green Conquest (I think that was its name) about 1987 vintage. The electronic module is secure - appears to be riveted on! Not sure how you'd replace it.
Thanks.
|
|
|
|
|
Joined: Dec 1999
Posts: 5,407 Likes: 35
Repair Junkie
|
Mike@Narellan, Is the module a gold colour? If so I would replace it. Click on this link for information: [b]Victa old Electrical information[/b] Regards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
Forums145
Topics13,072
Posts107,318
Members17,878
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
