|
0 members (),
4,609
guests, and
344
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Oct 2005
Posts: 3
Novice
|
I require any information on victa palstic black carby - i am having problem with fuel leak out the primer hole
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
lawncat, The problem with the fuel leak would be the needle. Note that one end of the needle has a round end an the other has a point on it. The point end goes in first not the round. Check the needle first. Regards, Bruce ![[Linked Image]](https://www.outdoorking-forum.com.au/board/biggrin.gif)
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Oct 2005
Posts: 3
Novice
|
thanks for your prompt reply bruce,
i have actually just been given this mower by a mate and it worked for a couple of mows then stopped. I think i may have lost this needed you are talking about when playing with the carby - could you explain or send me something which shows where this needle is supposed to go.
thanks again,
lawncat
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
lawncat, Information on carby has been sent. Regards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Oct 2005
Posts: 3
Novice
|
thanks again for your prompt responses bruce
lawncat
|
|
|
|
|
Joined: Nov 2005
Posts: 1
Novice
|
Hi,
I'd be grateful if I could get a copy of this info.. I have an old 170cc 2 stroke twin. After pulling it apart and putting it back together mine leaks out the primer nipple too.
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
Miles B, Information on carby has been sent. Regards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Nov 2005
Posts: 1
Novice
|
Hi, Could I too please get my hands on this Carby info???
Kindest Regards,
Snuffee
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
snuffee, Information on carby has been sent. Regards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Nov 2005
Posts: 2
Novice
|
Hello
I would appreciate this information too.
Thank you very much
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
hilly, Information on carby has been sent. Regards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Nov 2005
Posts: 2
Novice
|
could i please get this carb diagram info , as ive put a new carb kit in and still reving up and down, thanks
|
|
|
|
|
Joined: Nov 2005
Posts: 2
Novice
|
Dear Bruce
Fuel all over the driveway. May I also see this information please?
Mazza
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
mazza, To all I have now links for parts list so have a look at recent answers and you will find the links. This started this month and I am looking at setting up an area for links but this will take some time as I am working on it at the present. Happy HuntingRegards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Sep 2005
Posts: 8
Novice
|
hi bruce could i also get a copy on info of this black plastic carbi reguards bradley
|
|
|
|
|
Joined: Dec 1999
Posts: 5,436 Likes: 36
Repair Junkie
|
bradley, If you read some of the replies that I have made since the 1st of November you will find the link about the carby that you are after. One clue look for edward. Happy huntingRegards, Bruce
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
Forums144
Topics12,758
Posts106,813
Members18,156
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
