OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames victa ???? model

I was given a victa 2 stroke mower, i'd like to identify it. It has no model badgeing on it and has a green plastic top deck. The catcher is secured by the hinged metal door on the rear catching a lip on the plastic rear catcher ( i dont have the catcher but my neighbour had the same model). It uses 25:1 fuel mix. I need blade part numbers.
thanks

robbie d
If you have a look at the air filter housing on the handle you will see the model number (where the bolt goes through the handle). That will help a lot as I need to tell you the correct blades.

Regards,

Bruce

thanks willl check tonight

the model number is somewhat aged.
the numbers i could get off it are
AF05* AA9*

robbie d,
The mower is a Pacer made between 1990 & 1992 and the model nuber is AF055 AA90. The blade type is a CA09306S bolt set is CA09277S. The catcher is GC11697A.

Regards,

Bruce

thanks bruce.
Replacing the blades should kill the vibration problem it has (i think the previous owner was mowing gravel). the next problem is the smoke, I know its a two stroke but this one smokes enough to fumigate a whole street. any places to check first? air filter, mixture?