OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Victa Lawn Mower Frames Victa Twin Barrels

Hi all, looking for a set of barrels for the twin Victa, it is for a display motor only and not for running, so they don`t have to have good bores etc, it is a shame to show the mower but nobody can see the technology of the Twin, I have all the other parts, except for a flywheel as well.If any one can help let me know as I`m happy to pay for them and the flywheel.Thanks Brett L.

------------------

Brett,
I have just received a twin cylinder Victa this morning which has good compression. If you want it let me know.

Regards,

Bruce

Thanks for the reply Bruce, with freight cost the way it is at the moment I`m really only after the motor, is the flywheel the same used as the single of that era??? can you email me brettmj@optusnet.com.au with price$$$, and does that include carby, coil and vacum setup as well, as you know it is only going to be used as a display motor, so it does not have to be going. muchly gratias
Brett L.

------------------

Brett,
I have sent you pictures of the engine. Let me know if you still want it.

Regards,

Bruce

Thanks for your reply Bruce, happy to take motor, is there an old carby that can bolt on??, can you find out freight to Cairns, email me and I will work out how to send money, I pretty sure there are freight co`s that deliver for under 5 kg overnite for $12.00 interstate, you might know as you are sending parts quite often. Motor might be more than 5 kg`s ?? hear from you soon, was coil not with motor ??? cheers Brett

------------------

Hi Bruce, have sent email 23/11/03 to contact us mail box on this web site regarding payment for Twin Motor. Cheers Brett

------------------

Bruce ,know you are busy with the xmas rush, but just checking on the delivery of Twin Motor, Cheers Brett

------------------

Brett,
Sorry for taking so long getting back to you but I will have an answer for you on the freight tomorrow but at this stage I think it will only be about $10-15 as I will be sending it by post.

Regards,

Bruce

Hi Bruce , I will send $100.00 , could you email me as to what account no. it should go into ,if the post freight is more than $12-$15 I will fix up the difference, Cheers Brett L.

------------------

Brett,
I sent you the information that you require.

Regards,

Bruce

HI Bruce, thanks for the banking info,but I can`t deposit as you haven`t mentioned which Bank for your BSB and ACC. No. to be used. Please let me know asap as I would like to deposit before the weekend if possible, Cheers Brett.

------------------

Brett,
The bank is the Commonwealth.

Regards,

Bruce

Hi Bruce , Money has been deposited into your work account ($100.00) for Twin Motor
Many thanks Brett

------------------

Brett,
Parcel left today. You should have it by Friday.

Regards,

Bruce