|
|
|
|
Joined: Nov 2010
Posts: 2
Novice
|
Hi all,
I have a model 40 (I think) with a small rubber friction drive wheel that is mounted on the motor output shaft. It is (or was) approximately 25-30mm in diameter. does anyone know if these are avaialable and where from? Or suggest any alternatives?
Thanks James
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 10
Administrator - Master Technician
|
Hi JSY, Yes, James, you have a model 40 Scott Bonnar and the rubber friction wheel is part of the clutch engage/disengage mechanism for that model. I am not sure whether or not that part is still available (the model 40 was introduced in 1960) but I will PM you with a few suggestions. I would also like to give you a warm welcome to the forum. It's great to have another Scott Bonnar owner aboard.  
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl
|
|
|
|
|
Joined: Jan 2008
Posts: 42
Novice
|
James, If the rubber friction roller is slipping on your Model 40, a method worth a try is to lift the motor slightly by placing a washer under the three engine mounts between the engine and the base plate. This brings the roller into closer contact with the drum. Grant.
|
|
|
|
|
Joined: Nov 2010
Posts: 2
Novice
|
Thanks for the replies thus far. Unfortunately a large chunk has come away from the rubber. I am going to try and fashion something up and will post how it goes.
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 10
Administrator - Master Technician
|
As this thread is over 12 months old I will now close it for the archival value....If any member has anything to add, please send me a PM.
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
M |
T |
W |
T |
F |
S |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
|
29
|
30
|
31
|
|
|
|
|
|
|
Forums145
Topics13,039
Posts107,144
Members17,741
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
