|
|
|
2 members (syd666, MowingManiac),
1,616
guests, and
522
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Apr 2006
Posts: 58
Trainee
|
Hi Guys, I have a rover mower. The mower has a cutting bar setup.
The bar height is up to high inot the chassis to cut short.
I have another rover different base and same deal.
Is there and adaptor / spacer you can put between the crank end and the bar to extend the lenght?
The mower can cut long grass but lowest setting cut is 2 inches approx.
I remember while back i had a spacer looking thing and threw it out. I bet that was the thing to help.
Cheers
|
|
|
|
|
|
Joe Carroll
Unregistered
|
Is there still a boss on the end of the crankshaft?
I have seen the spacer things before, thought I havent got any here among my junk.
I have a rover with the 4 blade disc and find the blades sit about 1cm up in the deck itself. Just fodgured it was normal. Cheers Joe.
|
|
|
|
|
Joined: Apr 2006
Posts: 58
Trainee
|
Hi Joe, yeah there is a spindle / mount there the blade goes on with the 3 small bolts and one large in the centre.
The issues is 2 of my mowers have the same characteristic. I never knew what that spacer was really for till yesterday. The funny yhing is that they are not victa chassis they are rover chassis and the correct engines. I recon they are made for sir walter grass.
Cheers
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,009
Posts106,968
Members17,640
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
