|
|
|
1 members (Beefy),
1,275
guests, and
1,364
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: May 2009
Posts: 12
Novice
|
Hi Guys,
I am new here ... I have just taken my Scotty 45 out of the shed and the main drive clutch was seized. I stripped it out and cleaned up the cork etc etc.
My question is this; should the clutch cork have any lubrication on it such as oil or grease?
Thanks
Alistair
|
|
|
|
|
Joined: Dec 1999
Posts: 5,427 Likes: 36
Repair Junkie
|
adeas, No it should be clean free of oil and grease otherwise it could slip. 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: May 2009
Posts: 12
Novice
|
Many thanks for such a prompt reply.
I was almost tempted to put some oil on it as was slightly greasy and I thought it was the Cork / Tapered bearing face that was sticking. Turned out to be within the tapered bearing and drive shaft (hope that makes sense)
Anyway, put it all back together and clutch worked fine but no drive. Stripped it all out again and found that the woodruff key had fallen out as I was re-assembling.
I wasn't feeling the love for my Scotty this afternoon..... but it's all good now.
Once again many thanks for such a very quick reply
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 11
Administrator - Master Technician
|
As this thread has not been in use for some years, I will now close it.
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl 
|
|
|
|
Forums144
Topics12,729
Posts106,672
Members17,969
| |
Most Online40,124
Apr 13th, 2026
|
|
|
|
|
|
