OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Victa Two Stroke Engines What model is this? Also need parts manual.

Hi, Wondering if anyone can tell me more about this model of Powertorque? It belonged to a relative who had always intended to get it running again but never did. Apparently the carby went on it, which was the reason why he shelved it for another day. It has good spark, but clearly missing quite a few parts. I might still come across the top cover and fuel tank for it yet. Am still looking. I would like to know which model it is and where I can find a parts diagram and list for it? It might turn out being more expensive to get going again than it is worth.

Here is a link to the parts etc. CLICK HERE

G'day vint_mow and Bruce,

Going by the curved ribbed section on top of the base it's an early version, the alloy starter instead of plastic also early and probably has the big early electronic ignition module.

So guessing around 1984 , with these mowers you really need the sticker number off the end of the air cleaner cap for identification. Could be a Sabre with the chrome bars or could just be a bitsa as a lot of bases rusted out.

The last one I had with an alloy starter was 1983.

https://www.outdoorking-forum.com.au/forum/ubbthreads.php?ubb=showflat&Number=70751

Cheers
Max.

Another place to look for ID is on the side of the head the earlier ones have stamped numbers.

On the engine base near the intake manifold ,behind the carby there can be a date stamping also

Thank you for the replies. A lot there for me to read and digest. The parts might be a problem. If I can't find the remains of the carby and the top cover, it might end up at the Lifeline shop at the tip.

There is millions of those carbies kicking around, no problem finding carby parts for them