This is how to modify the G4 cam, all other steps from the LM carby modification are required

You will require 1 x 4mm or 5/32 screw and tap

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
Lifter / Spider height adjustment to the highest point on the cam and no further
[Linked Image]
[Linked Image]

Last edited by NormK; 05/02/17 12:08 AM.